Seven Safety Precautions in The Production Of Square Tube And Square Steel Tube

Now more and more people are engaged in engineering. On the one hand, due to the acceleration of urbanization, the market prospect is broad and the labor gap is large. From the perspective of workers, it is hard to engage in engineering work, but you can get a good economic reward and support a family. Under the promotion of these factors, projects in various regions are in full swing. For a project, although the quality of the project is important, there is also a safety as important as the quality. Compared with other industries, although the salary for engineering is higher, the safety risks are also large, which is related to the safety of people's lives and property. So no matter what project you are engaged in, the course of safety precautions.
Here are some precautions in the production of square tube.
1. The raw materials, semi-finished products and finished products required by square steel tubes and square steel tubes in the steelmaking process need to be transported by lifting equipment and locomotives. There are many risk factors in this process. Therefore, sufficient space should be considered in plant design, attention should be paid to equipment innovation, and maintenance should be strengthened. We should also improve the operation level of workers and strictly abide by the safety production regulations.
2. Low-pressure oxygen consumption leads to negative pressure of the oxygen pipe and blockage of the nozzle of the oxygen gun, which are easy to backfire when the fuel gas produced by the high temperature molten pool is poured into the tank and cause the explosion accident. Therefore, the oxygen pressure should be closely monitored during the production of square tube. When using oxygen in multiple furnaces, do not rush to use oxygen, so as not to cause pipe backfire.